LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1590 (Exterior Lighting System) >> Removal And Installation >> Headlamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering wheel in the lowest position.
  2. Carefully pull out the instrument cluster finish panel enough to gain access to the back of the headlamp switch.
    3. NOTE: Feel for flat surfaces on the headlamp switch and push the switch outward until the headlamp switch pops out.
  3. Reach behind the instrument cluster finish panel and release the headlamp switch from the instrument cluster finish panel.
    • Disconnect the electrical connectors.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals