Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove child safety seat tether anchor. For additional information, refer to SAFETY BELT SYSTEM .
If equipped, remove the utility trays and jack assembly.

Fig 1: Locating Trays And Jack Assembly
Courtesy of FORD MOTOR CO.
Remove the RH and LH B-pillar trim panels. For additional information, refer to B-PILLAR TRIM PANEL - REGULAR CAB in this section.
Remove the 4 pushpins.

Fig 2: Locating Pushpins
Courtesy of FORD MOTOR CO.
Remove the trim cover.
To install, reverse the removal procedure.