LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Interior Trim And Ornamentation - F250-F550) >> Removal And Installation >> Cab Rear Trim Panel - Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the child safety seat tether anchor. For additional information, refer to SAFETY BELT SYSTEM .
  2. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-PILLAR TRIM PANEL - CREW CAB  in this section.
  3. Remove the 4 pin-type retainers.
    Fig 1: Locating Pin-Type Retainers
    G04645823Courtesy of FORD MOTOR CO.
  4. Remove the cab rear trim panel.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals