LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1586 (Instrument Cluster System) >> Removal And Installation >> Warning Indicator Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER .
  2. NOTE: To remove a warning indicator bulb, rotate the bulb one quarter turn counterclockwise and lift it out from the instrument cluster.
    Fig 1: Locating Warning Indicator Bulb
    G04645362Courtesy of FORD MOTOR CO.
  3. Remove the warning indicator bulb(s) in question.
  4. To install, reverse the removal procedure.