LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1580 (Fuel System & Engine Controls - 6.0L (99P F450/550) Diesel - F250-F550) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Fuel injector hold-down bolt (early build, T40 Torx®) 33 24 -
Fuel injector hold-down bolt (late build, T45 Torx®) 35 26 -
Fuel injection control pressure (ICP) sensor 12 9 -
High-pressure oil pump mounting bolts 31 23 -
Fuel injection pressure regulator (IPR) valve 50 37 -
High-pressure pump cover 11 8 -
High-pressure pump discharge tube mounting bolts 11 8 -
Rear heat shield (M6x12) 11 8 -
Rear heat shield (M10x16) 49 36 -
Fuel rail plug assembly 27 20 -
High-pressure oil rail (1) - - -
Turbocharger flanges-to-exhaust/EGR tube, right side (2) 27 20 -
Exhaust tube-to-exhaust manifold flange, right and left (2) 27 20 -
EGR cooler clamp 6 - 53
Crankcase-to-head tube 82 60 -
Rocker arm carrier bolts (early build, M8 bolt) 31 23 -
Rocker arm carrier bolts (late build, M10 bolt) 62 46 -
Pipe plugs 
1/8 x 27 9 - 80
1/4 x 18 21 15 -
3/8 x 18 37 27 -
1/2 x 14 36 27 -
(1) Refer to INSTALLATION .
(2) Apply anti-seize lubricant to the bolt threads prior to assembly.