LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (Manual Transmission - F250-F550) >> In-Vehicle Repair >> Shift Lever and Boot >> Removal

Shift Lever and Boot: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 screws and the shift lever boot.
    Fig 1: Identifying Gear Shift Lever Boot Screws
    G03923381Courtesy of FORD MOTOR CO.
  2. Remove the upper gearshift lever.
    Fig 2: Locating Upper Gearshift Lever
    G04650391Courtesy of FORD MOTOR CO.
  3. Remove the lower shift lever boot.
    Fig 3: Locating Lower Shift Lever Boot
    G04650392Courtesy of FORD MOTOR CO.
  4. Remove the lower gearshift lever and the shift housing.
    Fig 4: Locating Lower Gearshift Lever
    G04650393Courtesy of FORD MOTOR CO.
  5. Separate the lower shift lever and gearshift lever blocks from the shift housing.
    Fig 5: Locating Gearshift Lever Blocks
    G04650394Courtesy of FORD MOTOR CO.
  6. Remove the inner shift lever boot ring, then the shift lever boot.
    Fig 6: Removing Inner Shift Lever Boot Ring
    G04650395Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals