Case - Intermediate Housing: Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Using the special tools, install the intermediate housing countershaft bearing race.
- Using the Heat Gun, heat the bearing area of the housing.
  
  Fig 1: Installing Center Shift Rail Bearing
  Courtesy of FORD MOTOR CO.
Using the special tools, install the intermediate housing mainshaft bearing race.
- Using the Heat Gun, heat the bearing area of the housing.
  
  Fig 2: Installing Intermediate Housing Mainshaft Bearing Race
  Courtesy of FORD MOTOR CO.
Using the special tools, install the center rail shift bearing.
- Using the Heat Gun, heat the bearing area of the housing.
  
  Fig 3: Installing Center Rail Shift Bearing
  Courtesy of FORD MOTOR CO.