LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1574 (Manual Transmission & Clutch System - General Information - F250-F550 Super Duty) >> Removal And Installation >> Clutch Pressure Plate Locating Dowels >> Installation

Clutch Pressure Plate Locating Dowels: Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not damage the bore or the surrounding surface area.
  1. Using a brass or plastic mallet, drive the dowels squarely into place until fully seated in the bore.
scientia non olet · About LEMON Manuals