LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Center support fluid feed bolts 32 24 -
Coast clutch hub-to-overdrive carrier bolts 25(1) 18(1) -
Extension housing-to-case bolt 47 35 -
Transmission fluid filler tube nut 10 - 89
Output shaft retaining nut 200 148 -
Output shaft speed (OSS) sensor bolt 9 - 80
Output shaft flange bolt 135 100 -
Overdrive (OD) piston return spring bolts 29 21 -
Parking rod guide plate-to-case bolts 25 18 -
Parking pawl abutment-to-case bolts 25 18 -
Power take off plate-to-case bolts (if equipped) 41 30 -
Pump body-to-case bolts 27 20 -
Shift cable bracket bolts 25 18 -
Solenoid body and backing plate-to-case bolts 13 10 -
Solenoid body-to-case bolts 13 10 -
Solenoid body electrical connector bolt 5 - 44
Torque converter-to-flexplate nut 48 35 -
Transmission fluid pan drain plug 18 13 -
Transmission fluid pan pan-to-case bolts 15 11 -
Transmission fluid cooler tube nut at case 40 30 -
Transmission range (TR) sensor-to-case bolts 10 - 89
Transmission fluid remote filter housing-to-manifold 50 37 -
Transmission-to-engine bolts 47 35 -
Transmission rear mount nuts 94 69 -
Transmission rear mount-to-crossmember nuts 103 76 -
Transmission support crossmember to frame bolts and nuts 81 60 -
Turbine shaft speed (TSS) and intermediate shaft speed sensor bolt 9 - 80
(1) Plus 90 degrees.