Extension Housing Gasket - Four Wheel Drive (4WD): Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the transfer case. For additional information, refer to TRANSFER CASE .
Using the special tool, remove the output shaft retaining nut.

Fig 1: Identifying Output Shaft With Special Tool
Courtesy of FORD MOTOR CO.
Disconnect the output shaft speed (OSS) sensor electrical connector.

Fig 2: Identifying Output Shaft Speed (OSS) Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the bolts and the transmission extension housing.

Fig 3: Locating Transmission Extension Housing Bolts
Courtesy of FORD MOTOR CO.
Remove and discard the extension housing gasket.

Fig 4: Locating Extension Housing Gasket
Courtesy of FORD MOTOR CO.