LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Forward GEARTRAIN - Assembly >> Assembly

Forward GEARTRAIN - Assembly: Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    Fig 1: Locating Forward Clutch Assembly
    G04650009Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    Fig 2: Locating No. 9 Forward Clutch Bearing
    G04650010Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    Fig 3: Locating Forward Hub And Ring Gear Assembly
    G04650011Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    Fig 4: Locating Planet Carrier And Bearing Assembly
    G04650012Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    Fig 5: Locating No. 12 Thrust Bearing
    G04650013Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
      Fig 6: Locating Forward Clutch Assembly
      G04650014Courtesy of FORD MOTOR CO.
  7. Install the special tools. Position aside to use during transmission assembly.
    Fig 7: Identifying During Transmission Assembly
    G04650015Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals