General Procedures: Sprockets
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the timing chain/belt and the sprockets.
- Install new components as necessary. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.
WARNING:
To avoid the possibility of personal injury or damage to the vehicle, do not operate the engine with the hood open until the fan blade has been examined for possible cracks and separation.
NOTE:
Specifications show the expected minimum or maximum condition. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS
, ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS
or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS
for appropriate procedure.
NOTE:
If a component fails to meet the specifications, it is necessary to install a new component or refinish. If the component can be refinished, wear limits are provided as an aid to making a decision. A new component must be installed for any component that fails to meet specifications and cannot be refinished.