Connecting Rod Bend

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
- Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.
- If out of specification, install new components as necessary. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.
  
  Fig 1: Measuring Connecting Rod Bend
  Courtesy of FORD MOTOR CO.