Camshaft Bearing Journal Clearance

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance.

Remove the camshaft bearing cap and lay Plastigage across the surface. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.

NOTE: Do not turn the camshaft while carrying out this procedure.

Fig 1: Measuring Plastigage Across Bearing Surface

Courtesy of FORD MOTOR CO.

Position the camshaft bearing cap and install the bolts. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.
Use Plastigage to verify the camshaft journal clearance.
- If out of specification, install new components as necessary. Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.