LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Exhaust System -- F250-F550 Super Duty) >> Removal And Installation >> Catalytic Converter - 6.0L Diesel >> Removal

Catalytic Converter - 6.0L Diesel: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and discard the 2 catalytic exhaust downpipe-to-catalytic converter nuts.
  2. Loosen the catalytic converter-to-muffler coupling or, if equipped, catalytic converter-to-exhaust intermediate pipe coupling.
  3. Disconnect the catalytic converter from the rubber isolator.
  4. Remove the catalytic converter.
scientia non olet · About LEMON Manuals