LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1561 (HVAC Control System - F250-F550 Super Duty) >> Removal And Installation >> Vacuum Reservoir and Bracket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nuts.
    • To install, tighten to 8 Nm (71 lb-in).
      Fig 1: Locating Nuts
      G04645287Courtesy of FORD MOTOR CO.
  2. Disconnect the vacuum hoses and remove the A/C vacuum reservoir tank and bracket.
    Fig 2: Locating Vacuum Hoses
    G04645288Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals