LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1561 (HVAC Control System - F250-F550 Super Duty) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR .
  2. Remove the A/C clutch disc and hub retaining bolt.
    1. Hold the A/C clutch disc and hub with the special tool.
    2. Remove the bolt.
      Fig 1: Using Special Tool To Hold A/C Disc And Hub Assembly
      G03952015Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub spacers.
    1. Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the compressor shaft.
    2. Lift the A/C clutch disc and hub, and the A/C clutch disc and hub spacer from the compressor shaft.
      Fig 2: Lifting A/C Clutch Disc And Hub, And A/C Clutch Disc
      G04645158Courtesy of FORD MOTOR CO.
  4. Remove the pulley snap ring.
    Fig 3: Locating Pulley Snap Ring
    G04645159Courtesy of FORD MOTOR CO.
  5. Remove the A/C clutch pulley.
    1. Install the special tool.
    2. Remove the A/C clutch pulley.
      Fig 4: Identifying A/C Clutch Pulley
      G04645160Courtesy of FORD MOTOR CO.
  6. CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
  7. Remove the A/C clutch field coil.
    1. Install the special tool on the nose opening of the A/C compressor.
    2. Install the special tool.
    3. Remove the A/C clutch field coil.
      Fig 5: Identifying A/C Clutch Field Coil
      G04645161Courtesy of FORD MOTOR CO.