LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Engine - 6.0L (99P F450/550) Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Prior to removing the exhaust manifold, inspect the exhaust manifold for warpage with a feeler gauge between the manifold and the cylinder head. Record the measurement and compare with the specifications.
  3. Remove the 2 LH exhaust manifold-to-turbocharger adapter pipe nuts.
  4. Disconnect the exhaust pressure (EP) sensor tube from the LH exhaust manifold.
  5. Remove the 8 bolts, 8 spacers and the LH exhaust manifold.
scientia non olet · About LEMON Manuals