Crankshaft Rear Seal With Retainer Plate: Notes
WARNING: This page is about a different car, the 2006 Ford Pickup and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS REFERENCE
| Installer, Crankshaft Rear Seal 303-518 (T95P-6701-DH) |
|
| Remover, Crankshaft Rear Seal 303-519 (T95P-6701-EH) |
|
| Installer, Crankshaft Rear Seal 303-516 (T95P-6701-BH) |
|
| Remover, Crankshaft Rear Oil Slinger 303-514 (T95P-6701-AH) |
|
| Installer, Crankshaft Rear Oil Slinger 303-517 (T95P-6701-CH) |
|
| Impact Slide Hammer 100-001 (T50T-100-A) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Metal Surface Prep ZC-31 |
- |
| Silicone Gasket Remover ZC-30 |
- |
| Silicone Gasket and Sealant TA-30 or equivalent |
WSE-M4G323-A4 |
| SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalent | WSS-M2C930-A |