LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Engine Cooling System - F250-F550 Super Duty) >> Specifications >> General Specifications

General Specifications

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Cooling System Capacity 
5.4L 25.0 L (26.4 quarts)
6.0L 26.0 L (27.5 quarts)
6.8L 26.0 L (27.5 quarts)
Coolant Type 
Motorcraft Premium Gold Engine Coolant VC-7-A (in California, Oregon and New Mexico VC-7-B, in Canada CVC-7-A) or equivalent (yellow color) WSS-M97B51-A1
Other Chemicals 
Cooling System Stop Leak Pellets VC-6 WSS-M99B37-B6
Premium Cooling System Flush VC-1 ESR-M14P7-A
Thread Sealant with PTFE TA-24 WSK-M2G350-A2
Silicone Brake Caliper Grease and Dielectric Compound XG-3A ESE-M1C171-A
Threadlock 262 TA-26 WSK-M2G351-A6
Coolant System Pressure Test Specifications 
Radiator test pressure 124 kPa (18 psi)
Fan Clutch Test Specifications 
Minimum speed requirement 1500 RPM
Maximum speed requirement 2400 RPM
Radiator Cap Pressure Test Specifications 
Pressure relief opening pressure Use individual readings listed on cap
Thermostat Opening Temperatures 
Starts to open - 5.4L (3V) 86.7°-90.6°C (188-195°F)
Fully open - 5.4L (3V) 100°C (212°F)
Starts to open - 6.8L (3V) 83°-87°C (181°-189°F)
Fully open - 6.8L (3V) 99°C (210°F)
Starts to open - 6.0L 87°-91°C (189°-196°F)
Fully open - 6.0L 104°C (219°F)