LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Transfer Case - Four Wheel Drive (4WD) Systems -- F250-F550 Super Duty) >> Removal And Installation >> Pulse Vacuum Hublock (PVH) Solenoid >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the pulse vacuum hublock (PVH) solenoid.
    1. Disconnect the harness connector.
    2. Remove the vacuum hose connector.
      Fig 1: Identifying Vacuum Hose Connector And Harness Connector
      G04650808Courtesy of FORD MOTOR CO.
  2. Remove the PVH solenoid bolts and the PVH solenoid.
    Fig 2: Locating PVH Solenoid Bolts
    G04650809Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals