Bearing Shimming
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Drive-away shudder is the predominant symptom associated with driveline angles condition on vehicles with 2-piece driveshafts. Drive-away shudder can usually be corrected by shimming down the driveshaft center bearing bracket. For additional information about the center bearing and support bracket, refer to DRIVESHAFT .
If the drive-away shudder cannot be corrected by shimming down the driveshaft center bearing bracket, check the driveline angles as described.