LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Rear Drive Axle/Differential - DANA 80 -- F350 Super Duty) >> Diagnosis And Testing >> Rear Drive Axle and Differential >> Checking Differential Ring Gear Backlash

Checking Differential Ring Gear Backlash

WARNING: This page is about a different car, the 2006 Ford Pickup and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential assembly.
  2. Remove the differential housing cover.
  3. Using a suitable dial indicator and the special tool, measure and record the differential ring gear backlash in 4 opposing points on the ring gear.
    Fig 1: Checking Differential Ring Gear Backlash
    G03878483Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals