General Specifications
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Rear brake disc minimum thickness (F-250 and F-350) | 32.4 mm (1.27 in) |
| Rear brake disc minimum thickness (F-450 and F-550) | 37.4 mm (1.47 in) |
| Minimum thickness to machine rear brake disc (F-250 and F-350) | 33.0 mm (1.29 in) |
| Minimum thickness to machine rear brake disc (F-450 and F-550) | 38.0 mm (1.49 in) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A or WSS-M6C62-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |