LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1526 (Information System And Entertainment Systems) >> Removal And Installation >> Antenna Lead-in Cable >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. For additional information, refer to AUDIO UNIT  in this article.
  2. Disconnect the antenna lead-in cable from the antenna cable.
  3. Release the antenna lead-in cable pin-type retainers.
  4. Remove the antenna lead-in cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals