Speaker Walk-Around Test (Premium CD6 Only)
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or the audio unit self-diagnostic mode, the audio unit must be turned on and in the tuner mode (AM/FM).
- To enter the speaker walk-around test, simultaneously press and hold the audio unit POWER button and the AUTO-S button.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about one to two seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF LF LR RR.
- The speaker walk-around test will self cancel.