LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1524 (Seat System) >> Removal And Installation >> Seat Cushion - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the latch and tilt the rear seat cushion to the FORWARD position.
  2. Release the locking tab and slide the rear seat cushion outward to remove.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals