LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1524 (Seat System) >> Diagnosis And Testing >> Seats >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for the following obvious signs of mechanical and electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Switch(es)
    • Seat tracks obstructed or damaged
    • Battery junction box (BJB) fuse 10 (30A) (Escape and Mariner)
    • BJB fuse 29 (20A) (Hybrid)
    • Smart junction box (SJB) fuses:
      • 9 (30A)
      • 35 (5A)
    • Circuitry
    • Loose or corroded connections
    • Seat control switch
    • Power seat motor(s)
    • Heated seat switch(es)
    • Heated seat relay
    • Heated seat module(s) (early build)
    • Heated seat element(s)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify that symptom and GO to SYMPTOM CHART .