Side Air Bags
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Depending on the vehicle build date, some vehicles that are not equipped with the side impact protection safety package (safety canopies and side air bags) option may or may not be equipped with bridge resistor(s) and the associated wiring.
The driver and passenger side air bags are attached to the seat backrest frame. For additional information, or if the side air bag(s) has been deployed, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
Front seat backrest trim covers installed on seats with side air bags can not be repaired. The front seat backrest trim covers are to be installed new. Cleaning of the trim covers is permissible.
If a side air bag deployment has taken place, install a new seat backrest cushion, trim cover and side air bag module. Install a new seat backrest frame if necessary.