LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1521 (HVAC Control System - General Information And Diagnostics - (Except Hybrid)) >> Diagnosis And Testing >> Climate Control System >> Function Selector Switch Vacuum Application Table

Function Selector Switch Vacuum Application Table

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A leak in the vacuum control circuit may occur during acceleration (slow leak) or may exist at all times (large leak) and may exist only when specific functions are selected (indicating a leak in that portion of the circuit). The vacuum hoses used in the passenger compartment control circuit are constructed from PVC plastic material. The vacuum hoses used in the engine compartment are constructed of Hytrel®. Because of the materials used, never pinch off the vacuum hoses to locate a leak during diagnosis. A golf tee can be used as a plug when it is necessary to plug one end of the vacuum hose for leak test purposes.
FUNCTION SELECTOR SWITCH VACUUM APPLICATION TABLE

Switch Port Color Function Function Selector Switch Position
MAX A/C A/C Panel Floor/Panel OFF Floor Floor/Defrost Defrost
1 White Recirc/fresh V NV NV NV V NV NV NV
2 Yellow Defrost V V V V V NV V NV
3 Red Floor NV NV NV V V V V NV
4 Orange Panel/Floor V V V V NV NV NV NV
5 Black Vacuum source V V V V V V V V
6 Not Used Not Used N/A N/A N/A N/A N/A N/A N/A N/A
V=Vacuum
NV=No vacuum