LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1517 (Anti-Theft System - Pats - (Hybrid)) >> General Procedures >> Key Programming Switch State Control >> Notes

Key Programming Switch State Control: Notes

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL CHART

G04622164
 Worldwide Diagnostic System (WDS)
Vehicle Communication Module (VCM) with appropriate adapters, or equivalent diagnostic tool
NOTE: The spare key programming switch is a diagnostic tool-programmable switch which provides the capability to enable/disable the customer spare key programming procedure. Refer to the Owner's Literature or KEY PROGRAMMING USING TWO PROGRAMMED KEYS  in this article. This programmable switch is provided as a convenience for customers who may not want the spare key programming procedure available to the vehicle driver.
NOTE: The spare key programming switch state can be viewed by PCM SPARE_KY.
  1. Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch to ON.
  2. Using the diagnostic tool select PCM from the menu. Follow SECURITY ACCESS to obtain security access. For additional information, refer to ANTI-THEFT SECURITY ACCESS  in this article.
    3. NOTE: The default setting on delivery of all new vehicles is < ENABLE >.
  3. From the diagnostic tool menu, set the SPARE KEY PROGRAMMING SWITCH selection to desired setting:

    < ENABLE > Spare key programming procedure is accessible.

    < DISABLE > spare key programming procedure is not accessible.

scientia non olet · About LEMON Manuals