LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1505 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Liftgate Latch Actuator >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate latch remote control. For additional information, refer to LIFTGATE LATCH REMOTE CONTROL  in this article.
  2. Remove the 2 screws and the liftgate latch actuator.
    Fig 1: Identifying Liftgate Latch Actuator Screws
    G04622420Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals