LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1505 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Hood Latch >> Removal

Hood Latch: Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hood latch nut.
    2. NOTE: Mark the hood latch position prior to removal of the hood latch bolts.
  2. Remove the 2 hood latch bolts.
  3. Remove the hood latch.
    1. Release the cable conduit.
    2. Disconnect the cable.
      Fig 1: Removing Hood Latch Cable
      G04622390Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals