LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1500 (Supplemental Inflatable Restraint System) >> Diagnosis And Testing >> Pinpoint Tests - Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Tests >> Pinpoint Test J: LFC 33, 34 and 38/DTC B2292 - Restraint System Seatbelt Pretensioner Status >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The restraints control module (RCM) checks all of the safety belt pretensioners for faults. If the RCM detects 1 of the following faults on any of the safety belt pretensioner circuits, it will store diagnostic trouble code (DTC) B2292 in memory and flash, depending on the fault indicator, either lamp fault code (LFC) 33, 34 or 38 (or higher priority code if 1 exists) on the air bag indicator.

The Hybrid vehicles are equipped with 3 pretensioners. The driver side is equipped with a safety belt buckle pretensioner and a safety belt retractor pretensioner while the passenger side has only a safety belt buckle pretensioner.