LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1496 (Exterior Lighting System) >> Removal And Installation >> License Plate Lamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push the license plate lamp housing to the right and pull it out.
  2. Disconnect the electrical connector.
  3. Remove the license plate lamp holder and lamp.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals