LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1490 (Instrument Cluster System) >> Removal And Installation >> Instrument Cluster Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER  in this article.
  2. Release the 6 tabs on the lens and remove the lens from the instrument cluster.
    Fig 1: Locating Instrument Cluster Lens Tabs
    G04621753Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.