LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1482 (Drum Brake System) >> General Procedures >> Brake Shoe Adjustment

Brake Shoe Adjustment

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

G04617676
 Brake Adjustment Gauge
206-D002
(D81L-1103-A) or equivalent
  1. Remove the brake drum. For additional information, refer to BRAKE DRUM .
  2. Using the special tool, measure the inside diameter of the brake drum.
    Fig 1: Measuring Inside Diameter Of Brake Drum Using Special Tool
    G04617677Courtesy of FORD MOTOR CO.
  3. Position the special tool on the brake shoes and linings and adjust accordingly.
    Fig 2: Measuring Brake Shoe Lining Using Special Tool
    G04617678Courtesy of FORD MOTOR CO.
  4. Install the brake drum. For additional information, refer to BRAKE DRUM .
scientia non olet · About LEMON Manuals