LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Wiper System & Washer System - F150 Pickup) >> Component Tests >> Wiper Motor

Wiper Motor

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Disengage linkage from wiper motor. Disconnect wiper motor harness connector C125. Connect ammeter between negative battery cable and terminal No. 3 (Black wire) at wiper motor harness connector C125. Apply battery voltage to terminal No. 4 (White wire) at wiper motor harness connector C125 for low speed operation. For high speed operation, apply battery voltage to terminal No. 5 (Dark Blue/Orange wire) at wiper motor harness connector C125. Current draw with wiper linkage disconnected should not exceed 3.5 amps at low speed and 5.5 amps at high speed.

scientia non olet · About LEMON Manuals