Power Steering Pump Pulley - 2.3L: Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Rotate the accessory drive belt tensioner clockwise and position the accessory drive belt aside.
Remove the 2 A/C manifold and tube assembly bracket nuts and position the bracket aside.

Fig 1: Locating A/C Manifold And Tube Assembly Bracket Nuts
Using the special tool, remove the power steering pump pulley.

Fig 2: Removing Power Steering Pump Pulley Using Special Tool (211-016)