LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1458 (Engine System-General Information) >> Diagnosis And Testing >> Engine >> Valve Train Analysis - Engine Off, Valve Tappet

Valve Train Analysis - Engine Off, Valve Tappet

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Valve tappet noise can be caused by any of the following:

Excessive collapsed valve tappet shim gap can be caused by incorrect initial adjustment or wear of valve tappet shim face. For additional information, refer to VALVE TAPPET INSPECTION  or refer to the appropriate engine article for valve train shim and gap inspection.

scientia non olet · About LEMON Manuals