LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1457 (HVAC Control System) >> Removal And Installation >> Register - Driver Side >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center register duct. For additional information, refer to CENTER REGISTER DUCT .
  2. Remove the 2 driver side register nuts and the driver side register.
  3. To install, reverse the removal procedure.