LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1457 (HVAC Control System) >> Removal And Installation >> Air Conditioning (A/C) Compressor Shaft Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)

G04621563Courtesy of FORD MOTOR CO.
Holding Fixture, Compressor Clutch
412-133
G04621564Courtesy of FORD MOTOR CO.
Holding Fixture, Compressor Clutch
412-098 (T94P-19703-AH)
G04621565Courtesy of FORD MOTOR CO.
Protector, A/C Compressor
Shaft Oil Seal
412-094 (T94P-19623-F)
G04621566Courtesy of FORD MOTOR CO.
Remover, A/C Compressor
Shaft Oil Seal
412-059 (T89P-19623-BH)
G04621567Courtesy of FORD MOTOR CO.
Installer, A/C Compressor Shaft
Oil Seal
412-058 (T89P-19623-AH)
G04621568Courtesy of FORD MOTOR CO.
Remover, A/C Compressor Snap Ring
412-063 (T89P-19623-DH)
G04621569Courtesy of FORD MOTOR CO.
Remover, O-Ring Seal
100-010 (T71P-19703-C)