LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1444 (Steering System - General Information) >> Diagnosis And Testing >> Steering System - Hybrid >> Component Tests >> Tie-Rod Articulation Torque

Tie-Rod Articulation Torque

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This check may be done with the steering gear on or off the vehicle.
  1. Disconnect the tie-rod-end from the front wheel knuckle. Refer to REMOVAL AND INSTALLATION .
  2. Move the front wheel knuckle tie-rod back and forth 3 times.
  3. Hook a spring scale over the tie-rod end, or the threaded portion of the front wheel knuckle tie-rod and measure the force required to move the front wheel knuckle tie-rod. Refer to GENERAL SPECIFICATIONS , Tie-Rod Articulation Torque.
  4. If the force required to move the front wheel knuckle tie-rod does not meet the specifications, install a new front wheel knuckle tie-rod. Refer to REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals