LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1443 (Front Disc Brake System) >> Removal And Installation >> Front Brake Caliper Anchor Plate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake pads. For additional information, refer to BRAKE PADS .
  2. Remove the 2 brake caliper anchor plate bolts.
    • To install, tighten to 175 Nm (129 lb-ft).
  3. Remove the brake caliper anchor plate.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals