LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1438 (Rear Suspension System) >> Removal And Installation >> Wheel Studs >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and hub. For additional information, refer to WHEEL BEARING .
  2. Using a suitable press, remove the wheel studs from the wheel hub.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals