LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Power Transfer Unit (PTU)) >> Installation >> Intermediate Shaft Seal

Intermediate Shaft Seal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

G00561906Courtesy of FORD MOTOR CO.
 Handle
205-153 (T80T-4000-W)
G00561913Courtesy of FORD MOTOR CO.
 Installer, PTO Driven Gear Oil Seal
308-429
  1. Using the Handle and PTO Driven Gear Oil Seal Installer, install the intermediate shaft seal.
    Fig 1: Identifying PTO Driven Gear Oil Seal Installer
    G00561914Courtesy of FORD MOTOR CO.
  2. Install the Power Transfer Unit (PTU) . For additional information, refer to POWER TRANSFER UNIT (PTU) - AUTOMATIC TRANSAXLE .
scientia non olet · About LEMON Manuals