LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Output Shaft Seal >> Installation

Output Shaft Seal: Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the PTU rear output shaft oil (pinion) seal.
    Fig 1: Installing Rear Output Shaft Seal Using Special Tool
    G04621134Courtesy of FORD MOTOR CO.
  2. Install the deflector.
  3. Install the PTU rear output shaft flange. For additional information, refer to OUTPUT FLANGE .
scientia non olet · About LEMON Manuals