LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Driveline System-General Information) >> Diagnosis And Testing >> Driveline System >> Analysis of Vibration >> Wheel Hub, Steering Knuckle Inspection

Wheel Hub, Steering Knuckle Inspection

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire. Refer to WHEELS & TIRES .
    Fig 1: Identifying Special Tool (100-D002)
    G04617569Courtesy of FORD MOTOR CO.
  2. Position the special tool. Push and pull the wheel hub by hand and measure the wheel bearing end play. Make sure that no suspension movement is noted.
  3. If the wheel bearing end play is greater than zero, install a new wheel bearing. Refer to FRONT SUSPENSION .
scientia non olet · About LEMON Manuals