LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Power Window System - F150 Pickup) >> Removal & Installation >> Central Junction Box

Central Junction Box

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. Remove the lower instrument panel steering column cover. Remove the bulkhead electrical harness connectors (C270a and C270b) from the central junction box (interior fuse panel). Unbolt and remove the central junction box. Disconnect the GEM electrical harness connectors. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals