LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1417 (Supplemental Inflatable Restraint System) >> Diagnosis And Testing >> Pinpoint Tests - Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Tests >> Pinpoint Test Q: DTC B2435 - Driver Safety Belt Buckle Switch Circuit Resistance Out of Range >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

As part of the SRS, the safety belt buckles are equipped with Hall-effect switches. The safety belt switches indicate to the restraints control module (RCM) whether the safety belts are connected or disconnected. Refer to AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (SRS) .

The RCM checks the driver safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store DTC B2435 in memory, flash LFC 7-5 on the air bag indicator and the secondary air bag warning chime will be activated.